|
|
SSF-6 Silver Solder
56% Silver Brazing Alloy
Our flux coated SSF-6 silver solder flows like no other, is easier to use than fluxless rods, and will bond to more metals at over 70,000 psi. SSF-6 is 56% silver, which is especially useful when high strength is required, or when a very thin high flow is necessary to bond those hard to reach areas
- Cadmium Free silver solder
- Special "fast flow" flux coating provides twice the base metal cleansing action of conventional silver flux coatings
- No odors from rubberized compounds yet the flux coating is totally flexible and non-fragile
- The only flux coated silver solder strong enough to clean oxidized stainless steel
- Ideal for food and pharmaceutical applications
- Wets even burned stainless steel.
- 1" of our high content silver solder will flow 18"--the only silver solder manufactured with this capability
Applications:
Steel, stainless steel, cast iron, copper, brass and bronze. Can be used on any combination of these metals.
ALL WELD METAL ANALYSIS (typical weight %)
|
Ag
|
Cu
|
Zn
|
Sn
|
|
55-57
|
21-23
|
16-17
|
2-3
|
|
TYPICAL MECHANICAL PROPERTIES
|
Undiluted Weld Metal
|
Maximum Value up to
|
|
Tensile Strength
|
71,000 PSI
|
|
Yield Strength
|
60,000 PSI
|
|
Elongation
|
25%
|
|
Conductivity
|
14.3
|
|
Density
|
9.59/cm3
|
|
Hardness
|
Brinell 130
|
TORCH SETTING: Slightly Carburizing
WORKING TEMPERATURE: 1210o F
MELTING RANGE: 1140o F to 1200o F
Brazing Techniques:
After cleaning metal, preheat generally to 350o F
Heat the joint area to 800o F. Melt off some flux
and allow it to flow throughout the joint. Add alloy.
| Compare |
SSQ |
SSF6 |
| Strength |
Over 70,000 PSI |
Over 70,000 PSI |
| Form |
Syringe |
18 inch Rod |
| Flux |
Mixed in |
Flux coated |
| Melt Temp |
1150 |
1150 |
| Ease of Use |
Very easy |
Easy |
| Works on |
Stainless, Brass, Steel, Copper, Bronze, Cast Iron |
Stainless, Brass, Steel, Copper, Bronze, Cast Iron |
| Heat Source |
Any torch |
Any torch |
| Shelf Life |
9 months |
years |
| Clean Up |
Water and wire brush |
Water and wire brush |
| Special Care |
Refrigerate |
None |
| Position |
All position |
All position |
| Application |
Apply cold then heat |
Apply when metal is dull red |
Clients | Testimonials | Links | Interesting Information
   
© 1998-2010 Muggy Weld
The content of this website is copyrighted. No usage of ANY content of this website without written consent of MuggyWeld.com.
|
