Aluminum Welding Tips with Heat Freeze Heat Paste and Super Alloy 5 Aluminum Welding and Brazing Kit

Demonstration of how to protect your heat sensitive surfaces without disassembling your parts. We weld the aluminum with Super Alloy 5 rod and flux kit, while applying the Heat Freeze Heat Paste (formerly Cool Blue) to the rubber hose to dissipate the heat.

Heat Freeze Heat Paste is completely reusable, so you can add as much as you need and return it to the jar for future use when you are finished.

TIPS:

  • Always use adequate Heat Freeze Heat Paste to ensure your part is fully protected.
  • Always allow your part to cool completely before removing the Heat Freeze Heat Paste for your safety and the safety of your part.
  • Keep Heat Freeze Heat Paste clean to ensure long life of the product
  • For best results, occasionally add water to Heat Freeze Heat Paste as necessary to keep moist.
  • Allow adequate space between Heat Freeze Heat Paste and the area to be welded.  Heat Freeze Heat Paste works so well it can absorb the heat from the area needing to be repaired.
  • Wash hands after handling Heat Freeze Heat Paste or use gloves to apply.

 

Disclaimers:

Please visit https://www.aws.org/Standards-and-Publications/Free-Resources/#YourResources prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines.

Further product safety information is available at http://muggyweld.com/safety-guidelines

Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.

MSDS sheets available with purchase from MuggyWeld.com, upon request.

 

Check Out These Products