Welcome visitor you can login or create an account.

Currency: US Dollar

MuggyWeld LLC

0 item(s) - $0.00

Your shopping cart is empty!

SUPER ALLOY 1

Testimonials

Mike, I have to tell you that your 77 cast iron electrodes are fantastic--I need to order more to have it on hand.

 

I just welded a small block Chevy 400 engine with a broken ear on the starter mount. The engine was sitting on a 3 wheel engine stand and fell over breaking the mount. I placed a mild steel bolt in the broken mounting hole and built the whole corner back up, then I removed the bolt and re-tapped the bolt hole with no problem. It's looking pretty good.

 

I work on hard to find and restore irreplaceable antique cast iron parts. Your 77 welding rods are better than anything I've tried in the past. I'll try to remember to send you photos of my next cast iron job.

 

- Bob Carpenter
Ephrata, WA
Stay Connected

The 350º Pot Metal / White Metal / Zinc Die Cast Solder

Super Alloy 1 

  • Working temperature of 350°F for preventing warpage and base metal damage
  • Can be used to join aluminum with a soldering iron
  • Rod and flux work synergistically to prevent oxidation during soldering.
  • Super Alloy 1 flux is completely non-corrosive and washes off with warm water.

 

Attribute Super Alloy 1
Melting temperature 350° F
Bonding strength 20,000 PSI
Sizes available 3/32", 1/8"
Flux Honey liquid
Alloy color Silver
Contains cadmium? Yes
Recommended torch Propane, MAPP, butane, oxyacetylene
Metal warpage No
Can bond thick to thin metals? Good
Can join copper, brass, and bronze to other metals Yes
All position? Yes
Can be plated? Most metals except aluminum
Can be polished? Yes
Takes powder coating? Yes
Pre-cleaning necessary? Yes, with a wire brush, sanding, Dremel etc.

 

 

Show:
Sort By:
Super Alloy 1 Starter Kit 3/32"
Super Alloy 1 Starter Kit 3/32"

This multi-metal solder melts at 350°F with a tensile strength of 20,000 psi. Can be used to join po..

Super Alloy 1 Starter Kit 1/8"
Super Alloy 1 Starter Kit 1/8"

This multi-metal solder melts at 350°F with a tensile strength of 20,000 psi.  Can be used to j..

Super Alloy 1 Full Kit 3/32"
Super Alloy 1 Full Kit 3/32"

This multi-metal solder melts at 350°F with a tensile strength of 20,000 psi.  Can be used ..

Super Alloy 1 Full Kit 1/8"
Super Alloy 1 Full Kit 1/8"

This multi-metal solder melts at 350°F with a tensile strength of 20,000 psi.  Can be used to j..

Super Alloy 1 Replacement Flux
Super Alloy 1 Replacement Flux

1 Jar of Honey Liquid Flux (shelf life 2 years) ..

Combo 1
Combo 1

TEN 1/8" diameter rods Super Alloy 1  1 jar liquid flux TWENTY 3/32" diameter rods Super..

Combo 3
Combo 3

TWENTY 1/8" diameter rods Super Alloy 1 2 jars liquid flux SEVEN FREE rods Super Alloy 5 (1/1..

Combo 4
Combo 4

FIVE rods 1/8" diameter Super Alloy 1 1 jar liquid flux SEVEN 3/32" diameter rods Super Alloy..

Combo 5
Combo 5

FIVE 1/8" diameter rods Super Alloy 1 1 jar liquid flux SEVEN 3/32" diameter rods Super Alloy..

Combo 6
Combo 6

TEN flux coated rods SSF-6 silver solder TEN 1/8" diameter rods Super Alloy 1 1 jar liquid fl..

Combo 7
Combo 7

FIVE 1/8" diameter rods Super Alloy 1 1 jar liquid flux FOUR flux coated rods SSF-6 silver so..

Combo 9
Combo 9

FOUR flux coated rods SSF-6 silver solder FIVE 1/8" diameter rods Super Alloy 1 1 jar liquid ..